Canor AI 1.10 Integrated Tube Amplifier

Categories: ,

Description

DESCRIPTION

CANOR AI 1.10 is an integrated tube amplifier with an entirely new topology equipped with KT88 high-power tubes.
The aim of the development was to merge the best sound characteristics of previous models together. The amplifier operates in a pure class A with an auto-bias function, and with cathode feedback.

Highlights

  1. Operates in a pure class A with an auto-bias
  2. Instant switching between a triode and ultra-linear mode
  3. Possibility to create a monoblock connection of 2 units

Product features

  • an integrated tube amplifier in class A with an output power of 2 x 40 W
  • KT88 high-power tubes with autobias with a cathode feedback
  • an option to immediately switch between triode and ultra-linear mode
  • PCB’s utilize our premium CMT ™ technology
  • perfect separation of channels by using a relay attenuator / standalone blocks for each channel/gain control by 1 dB and maximum attenuation of 63 dB
  • the independently powered control part
  • filter capacitors with high capacitance deliver energy to accurate and tight basses
  • only use high-quality polypropylene capacitors have been used in the signal path
  • absolute selection and tubes matching with above-average parameters
  • an option of synchronous control enables the use of two amplifiers in a monoblock mode without the need of using an extra preamplifier and that is a Master/Slave mode with an output power of 80 W per channel

Specifications

Output power 2 x 40 W /4,8 Ω – ultralinear
2 x 20 W /4,8 Ω – triode
Gain -30 dB (at 8 Ω)
-28 dB (at 4 Ω)
Inputs sensitivity 500 mV
Frequency range (10 – 50 000) Hz ±0,5 dB / 5 W
Input impedance 30 kΩ
Inputs 5 x RCA, 2 x XLR (active only in monoblock connection)
Total Harmonic Distortion <0,05% / 1 kHz, 5 W
Signal-to-noise ratio > 95 dB
Filtration capacity 2200uF / 500V
Damping factor at 4 Ω load at the output 9 (based on measured output impedance)
Damping factor at 8 Ω load at the output 10,5 (based on measured output impedance)
Tube complement 4 x KT88 / 1 x 12AX7 / 2 x 12AT7
Power 230 V / 50 Hz / 375 VA
Input power 220W
Dimensions (w x h x d) 435 x 170 x 485 mm
Weight (net) 26 kg

Related products